Toyota G and Toyota H Chip Smart Key maker Programming Via Obd2 Port for Toyota

• Toyota G and Toyota H Chip Vehicle OBD Remote Key Programming Device support programming both Toyota G and Toyota H chip vehicle via OBD2 port

• Toyota G and Toyota H Chip Vehicle OBD Remote Key Programmer can apply to 4D67,68,72(G), support both G and H chip

• Toyota G key programmer is easy to operation

• Toyota g key programming tool Packages contains one pieces of Toyota G and H OBD Remote Key Programmer.

Description:

Toyota G OBD Remote key programmer device

Apply to 4D67,68,72(G)  Toyota add remote control

Get in the car and close the door, insert the key and turn the key on, insert the device into OBD. After the sound (Dee-), it eill start to add the remote control. After the sound (Dee- Dee-), open the door, when hear the sound blaring. Press “lock & unlock”key at at the same time.
And press the”lock “key. If the blaring end, It’s ok.
Note: Switch is on the right. (add remote control)

Toyota add transponder:
Get in the car and close the door, insert the main key into the lock and turn the key on, and then insert the device into the OBD If it will sound twice, it will start to add transponder.
After the sound (Dee- Dee-), 2-3minutes later,anti-theft light is on.and then remove the key (anti-theft light will flash), insert the new key and does not need turn the key, anti-thift light will be off later.
Note: switch is on the left.(add transponder)